SZL hot water boiler,as one kind of chain grate boiler,was developed in the 80s as a new type of water tube boiler.Over the past three decades,they have won the high praise form customers at home and aboard,and widely used in the hotels, laundromats, apartments,hospitals,nursing homes,greenhouses,etc.The hot water boiler combines excellent reliability and durability with high thermal performance,which makes itself one of the most widely distributed products of ZG.It can use coal and biomass as fuel.
1.Good Reputation
Since the SZL hot water boilers were developed,they have won the high praise form customers at home and aboard because of continuous improvement according to the needs of era and customer.
2.Unique Technology
The both sides of re-burning chamber and furnace chamber adopt the membrane water-cooling wall structure. With this kind of structure, the boiler has a high heat transmission coefficient, low heat loss, good airtightness, no furnace wall deformation and no ash leakage.
3.Strong Overload Capacity
Furnace front and rear water wall tube extend down to the upside of the grate,forming the front and back arches,which extends the radiation heating surface,thus the SZL hot water boiler has a wider range of overload adjusting.
4.High Combustion Efficiency
Inverted "α"furnace arch technology makes the front arch high and short, rear arch low and long. This structure increases the burning time of the flue gas in the furnace so as to improve the combustion efficiency.
5.Strong Adaptability for Fuels
The streamline shape back arch can throw the unburned carbon grains from the middle-rear part of grate into the front so that the coal is easier to get ignited.
6.Enough Power Output
The increase of SZL hot water boiler, height increases the furnace volume,which solves the small size and insufficient output shortcomings of shop-assembled boilers.
7.Long Service Life
The front and back arches use the water wall as skeleton and are casted with with high alumina cement,which avoids the the cracking and collapsing of arch brick,thus the service life of SZL hot water boiler can be prolonged.
Name |
Unit |
Model and Parameters |
SZL4-1.25 |
SZL6-1.25 |
SZL8-1.25 |
SZL10-1.25 |
SZL15-1.25 |
SZL20-1.25 |
SZL25-1.25 |
SZL4-1.6 |
SZL6-1.6 |
SZL8-1.6 |
SZL10-1.6 |
SZL15-1.6 |
SZL20-1.6 |
SZL25-1.6 |
SZL4-2.0 |
SZL6-2.5 |
SZL8-2.5 |
SZL10-2.5 |
SZL15-2.5 |
SZL20-2.5 |
SZL25-2.5 |
Rated Evaporation |
t/h |
4 |
6 |
8 |
10 |
15 |
20 |
25 |
Nominal working pressure |
Mpa |
1.25/1.6/2.5 |
Feed-water temperature |
℃ |
20 |
20 |
20 |
60 |
105 |
105 |
105 |
Steam temperature |
℃ |
194/204/226 |
Boiler Heating surface |
㎡ |
96.5 |
141.7 |
177 |
228 |
311 |
727 |
920 |
Grate Area |
㎡ |
5.5 |
7.66 |
10.4 |
11.8 |
17.7 |
20.8 |
25.8 |
Fuel |
|
II bituminous coal, meagre coal |
Combustion mode |
|
Chain Grate |
Shipping Dimension |
mm |
7600*2900
*3500 |
6290*2720
*3530 |
7144*3316
*3524 |
7850*3280
*3520 |
9583*3360
*3526 |
11600*3280
*3520 |
11900*3280
*3520 |
Shipping weight |
T |
36.6 |
30 |
33 |
35 |
40 |
45 |
50 |
eg:Model name:DHX Capacity:4t/h Pressure:1.25Mpa
SZL2.8-1.0/95/70 Model Name: SZL Capacity :2.8KW/h Working Pressure :1.0Mpa Hot water temperature:95℃ Feed water temperature:70℃